Joel Means's Collection
Dave Matthews & Friends 12/19/2003
Hartford Civic Centre, Hartford, CT
| Source | AKG 480/ck61 > Lunatec V3 > Tascam DA-P1 and Neumann KM140s > Lunatec V2 > Apogee MiniMe > iBook G3/700 > shntool |
| Media | SHN 3 discs |
| Notes | DTS surround sound mix from two audience sources |
| Tech Notes | I used EAC in secure mode to extract all tracks at 100% no reported errors. Cool Edit Pro 2.0 was used to align & synch the AKG480 and KM140s. CEP2.0 used to adjust the volume for the center and LFE channels. Surcode CD Pro DTS was used to encode to DTS. -3db was NOT applied to the rear channels. Both of the AUD sources for the front and rear channels were left at their original levels. - Mixed by dan@am-dig.com - Shn conversion done by dan@am-dig.com 05-JAN-2004 - Artwork by dan@am-dig.com 300dpi - For best results print at the highest resolution onto glossy photo paper. Design for use with a clear slim double jewel case. 5.1 DTS Info: Front Left: Left channel AKG 480/ck61 > Lunatec V3 Front Right: Right AKG 480/ck61 > Lunatec V3 Center: 50/50 Ratio Mixed to mono -3db AKG 480/ck61 > Lunatec V3 + Neumann KM140s > Lunatec V2 Surround Left: Left channel Neumann KM140s > Lunatec V2 Surround Right: Right channel Neumann KM140s > Lunatec V2 LFE: 50/50 Ration Mixed to mono -3db AKG 480/ck61 > Lunatec V3 + Neumann KM140s > Lunatec V2 Today's audio standards are moving towards multi-channel sound, like DTS and Dolby Digital. While the Audio-CD standard (Red Book) hasn't changed to accommodate these new sound formats, it is still possible to go around the specification and to put a 5.1 surround recording on a regular Audio-CD. To play a DTS-Audio-CD you must connect your DVD/CD player via a digital cable (optical or coaxial) to your DTS/Dolby-Digital receiver. It is not 100% sure that your receiver will recognize a DTS-Audio CD, so the first time you're trying to playback a DTS-Audio-CD you must do a test to determine if it can. Begin with the volume very low, start the disc and rise the volume gradually. NEVER listen to a DTS-Audio-CD through the analogue audio outputs of your CD/DVD player. |
| Trades Allowed | Yes |
| Lists | All Shows |
Owned by Joel Means
· Last Updated May 23, 2023
Add Show
View Show