Loading...
M. Flory's Collection

Dave Matthews Band   07/30/2005

Randall's Island Park, New York, NY
Source DTS-Audio-CD 5.1 Mix (4 source mix)
Media CDR   2 discs
Notes ^ With Trey Anastasio On Guitar
^^ With Robert Randolph On Pedal Steel

---------------------------------------------------------

Source Info (abridged - see complete text files included)

Source 1
Taper: Scott Brown
Source: DPA 4022s > Lunatec V3 (analog out) > Nordost Red Dawn
XLRs > Mytek Stereo192 @ 24bit/96khz > Sound Devices 722
Location: Row Q 2 seats left of center


Source 2
Taper: ??
Source: Schoeps CMC5(modified)/MK21 > Lunatec V2 > Apogee Mini-Me
@16/44.1, Soft Limit On > Sony D8
Location: 4th row right stack


Source 3
Taper: Ian White
Source: Neumann ak40s (ORTF) @ ~ 10' > Neumann KM100s > Lunatec
V3 @ 24/96 > Sound Devices 722
Location: Section 102, Row Q, Seat 10 (15th row/~ DFC)


Source 4
Taper: Christopher Jones
Source: DPA 4015 Wide Cardioid > Rupert Neve Designs Portico 5012
Microphone Preamplifier > Mytek Digital Stereo192 @ 96 kHz >
Apple Powerbook G4 > Metric Halo MIO Console Public Preview
3.0 Recording Panel (@ 24-bit/96 kHz)
Location: Section 103, Row F, Seats 9 and 10. Stand at 13'

---------------------------------------------------------

Tech Notes

SHN/FLACs were decoded to wave and SF 8.0 was used to reassemble
the tracks back to 1 long wave. CEP2.0 was used to align & synch
all 4 of the AUD sources. CEP2.0 used to adjust the volume for AUD
1-2-3. AUD4 was left at the original levels. Surcode CD Pro DTS
was used to encode to DTS.
- Mixed by dan@am-dig.com
- FLAC conversion done 14-AUG-2005
- Artwork by dan@am-dig.com 300dpi - For best results
print at the highest resolution onto glossy photo paper.
Design for use with a clear slim double jewel case.

---------------------------------------------------------

DTS-Audio-CD Info

Front
Left Channel AUD4 DPA4015
Right Channel AUD4 DPA4015

Center
Mixed to mono -5db AUD1 DPA4022

Surround
Left channel -3db AUD3 Neumann KM100s
Right channel -3db AUD3 Neumann KM100s

Sub/LFE
Mixed to mono -5db AUD2 MK21

---------------------------------------------------------

Notes

This is version 1a.

Disc 1 and disc 2 can be assembled seemlessly on longer media.

The AUD1 source used for the rear was recorded louder than the
AUD4 source used in the front. I try leave the levels alone but
this time I mixed the AUD1 into the rear channels at -2.5db. In
my experience louder rear channels is an undiserable effect.

d1t04 I trimmed 1:03.188 of crowd noise btwn 'Don't Drink The
Water' and 'Time Of The Season'. No music, tuning, talking or
anything of interest was cut, just crowd noise. This was then
crossfaded and is smooth and most likely undetectible.

d1t09 I trimmed 14.384 of crowd noise btwn 'Jimi Thing' and
'Tripping Billies'. No music, tuning, talking or anything of
interest was cut, just crowd noise. This was then crossfaded
and is smooth and most likely undetectible.

If you play this DTS-Audio-CD and hear static it is b/c you
didn't really read the text file, did you? Read below!!

---------------------------------------------------------

More On DTS

Today's audio standards are moving towards multi-channel sound,
like DTS and Dolby Digital. While the Audio-CD standard (Red
Book) hasn't changed to accommodate these new sound formats, it
is still possible to go around the specification and to put a 5.1
surround recording on a regular Audio-CD. To play a DTS-Audio-CD
you must connect your DVD/CD player via a digital cable (optical
or coaxial) to your DTS Dolby-Digital receiver. It is not 100%
sure that your receiver will recognize a DTS-Audio CD, so the
first time you're trying to playback a DTS-Audio-CD you must do
a test to determine if it can. Begin with the volume very low,
start the disc and raise the volume gradually. NEVER listen to
a DTS-Audio-CD through the analog audio outputs of your CD/DVD
player.

Burning Instructions
Burn them the absolute same way as you would burn any
normal Audio-CD from FLAC files.


Trades Allowed Yes
Owned by M. Flory · Last Updated May 23, 2023